- Abbasi, M. (2025). Experimental Study on Strength Properties of MICP-Treated Silty Sand. Contributions of Science and Technology for Engineering, 1(4), 28-34. doi:22080/cste.2025.28436.1010
- Shirazi, H., Shadan, F., & Qorbani Fouladi, M. (2024). Damage Detection of Truss Bridges Using Artificial Neural Network Considering the Effect of Non-Structural Elements. Contributions of Science and Technology for Engineering, 1(1), 44-51. doi:10.22080/cste.2024.5013
- Ebrahimi, A., & Adarang, H. (n.d.). Modeling MOSFET Threshold Voltage in TSMC 0.18um CMOS for Integrated Circuits Design. Contributions of Science and Technology for Engineering, 1(1), 1–11. doi:10.22080/cste.2024.5008
- Azar, A., Mashayekhi, M., Amiri, M., & Safari, H. (2021). Modeling steel supply chain and estimating its consumption through ABM methodology. Journal of industrial management perspective, 11(1), 33-52.
- National Research Council. (2002). Evolutionary and Revolutionary Technologies for Mining. The National Academies Press, Washington, United States.
- Torabi, A. (2020). Improving the Dry Process of Iron Ore Concentrate Production by the Aim of Dust Reduction Using the Value Engineering Approach. MSc Thesis, Shahid Bahonar University of Kerman, Kerman, Iran. (In Persian).
- Torabi, A., Moosavirad, S. H., Ariafar, S., and Eftekhari, A. (2020). Definition of Scope in Value Engineering Using Rich Pictures: A Case Study in Iron Ore Concentrate Production Line. 1st International Conference on Challenges and New Solutions in Industrial Engineering Management and Accounting, 16 July, 2020, Sari, Iran. (In Persian).
- Torabi, A., Moosavirad, S. H., Ariafar, S., & Eftekhari, A. (2021). Dust emission reduction in iron ore concentrate production plant using value engineering method. Environmental Science and Pollution Research, 28(28), 37647–37660. doi:10.1007/s11356-021-13331-9.
- El-Nashar, W. Y. (2017). Effect of drains coverings on environment by using value engineering. Alexandria Engineering Journal, 56(3), 327–332. doi:10.1016/j.aej.2017.05.013.
- Asgari, S. (2016). Analytical Review of the Value Engineering Methodologies and Selecting Superior Methodology Based on Topsis Multi-Criteria Decision. The Turkish Online Journal of Design, Art and Communication, 6(AGSE), 1153–1166. doi:10.7456/1060agse/001.
- Arab, D., Rajabi, H. M., Poshtvan, H., & Jahdi, N. (n.d.). Introduction to Value Engineering (Version 1). Educational Assistant of the Research Institute of Urban and Rural Management of the Organization of Municipalities and Rural Affairs. Academic Center for Education, Culture and Research.
- Younker, D. (2003). Value engineering: analysis and methodology. CRC Press, Boca Raton, United States.
- Sharma, V., & Kumar, R. (2017). Analysis to reduce cost through value engineering of furniture product in furniture industry–a case study. International Journal of Mechanical and Production Engineering, 5(11), 16-23.
- Talebi, D., Khosro Nobarai, B., & Fadavi Ardestan, M. (2012). Identifying the key Success Factors in Performing Value Engineering. Journal of Industrial Management Perspective, 2(3), 9-27.
- SAVE International. (2007). Value methodology standard and body of knowledge. SAVE International, Mount Royal, United States.
- Miles, L. D. (1962). Techniques of value analysis and engineering. McGraw-Hill, New York, United States.
- ASTM E1699-00(2005). (2005). Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems. ASTM International, Pennsylvania, United States.
- S. (n.d.). European Standard, British Standard, Value Management. EN, 12973.
- Ashworth, A., & Hogg, K. (2019). Value management. In Added Value in Design and Construction (Vol. 4183). Standards Australia. doi:10.4324/9781315839073-6.
- Ramazanpoor, E., and Hatam, A. (2011). Designing the Executive Model of Engineering Value of Material in Pars Khazar Firm. 4th National Conference on Value Engineering. Tehran. (In Persian).
- Rezania, A. R., Sharifpour, M., Meshkizadeh, M., & Zibanchi, M. H. (2011). Optimization of the Design of Irrigation and Drainage Networks Using Value Engineering-Case Study: Jofeir Irrigation and Drainage network, South West of Iran. ICID 21st International Congress on Irrigation and Drainage. (In Persian).
- Alem-Tabriz, A., & Moniri, M. R. (2011). Applying value engineering through fuzzy madm approach to improving project performance. Industrial Management Journal, 3(1), 81-98. (In Persian).
- Sharma, A., & Belokar, R. M. (2012). Achieving success through value engineering: a case study. Proceedings of the world congress on Engineering and computer science.
- Behncke, F. G. H., Maisenbacher, S., & Maurer, M. (2014). Extended model for integrated value engineering. Procedia Computer Science, 28, 781–788. doi:10.1016/j.procs.2014.03.093.
- Jahanshahloo, L., and Karimi, M. (2015). Application of Value Engineering Approach and Useful Citizens Participation in Urban Plans and Designs in the Saadi District of Shiraz. Haft Hesar Journal of Environmental Studies, 3(10), 57-70. (In Persian).
- Sepahdoust, J., Vosough-Razavi, K., Daneshi, M., et al. (2015). Improving Value Index and Innovation Development in the Bus Rapid Transit by using Value Engineering (Case Study in Line 1 of Mashhad BRT System). The 14th International Conference on Traffic and Transportation Engineering. Tehran. (In Persian).
- Mirzaee-Nasirabad, J., and Mohammadzadeh-Salteh, H. (2015). Comparative Study of How to Implement Value Engineering in Tabriz International Hospital Projects and Projects under the Ministry of Healthcare. Journal of Strategic Management in Industrial Systems, 10(32), 67-80. (In Persian).
- Mostafaeipour, A. (2016). A Novel Innovative Design Improvement using Value Engineering Technique: A Case Study. Journal of Optimization in Industrial Engineering, 9(19), 25-36.
- Singh, P., & Singh, J. (2016). Application of Value Engineering on Chassis Component for HCV — A Case Study. International Journal of Knowledge Engineering, 2(1), 43–49. doi:10.18178/ijke.2016.2.1.050.
- Soorani, R., Imani, M., and Sharifi, A. (2017). Application of Value Engineering in the Academic Environment: Identifying Processes and Factors Using It. Journal of Educational Leadership and Administration, 10(3), 93-124. (In Persian).
- Taromi, M., Hosseini, M., Pourhashemi, S. M., & Sadeghi, M. (2017). Value Engineering Based on Monitoring During TunnelExcavation Phase-aCase Studyof Hakim Tunnel. Journal of Engineering Geology, 11(1), 1. http://dorl.net/dor/20.1001.1.22286837.1396.11.1.5.2
- Bagheri, V., & Nezhad Ebrahimi, A. (2018). Energy optimization in the design of the facades of buildings with an emphasis on value engineering approach (Case Study: Omid commercial-residential complex in Mashhad). Geography (Regional Planning), 8(30), 195-207. (In Persian).
- Araszkiewicz, K. (2020). Value engineering applicability in design of sustainable, energy efficient buildings. E3S Web of Conferences, 220, 1013. doi:10.1051/e3sconf/202022001013.
- Nigjeh, M. J., & Amani, N. (2022). Evaluation of influential value engineering factors on the function of interchanges: case studies in Iran. Journal of Engineering and Applied Science, 69(1). doi:10.1186/s44147-022-00100-9.
- Chen, W. T., Merrett, H. C., Liu, S. S., Fauzia, N., & Liem, F. N. (2022). A Decade of Value Engineering in Construction Projects. Advances in Civil Engineering, 2022. doi:10.1155/2022/2324277.
- Youssef, M., AlDeep, S. M. H., & Olwan, M. M. (2023). Value engineering: Case study of Libyan educational buildings. Alexandria Engineering Journal, 76, 735–746. doi:10.1016/j.aej.2023.06.078.
- Edward, O., Temilade Z, O., Abiodun S., A., Ademola O., B., Alexander A, O., & Rakiya A, A. (2023). The Impact of Value Engineering in Construction: Enhancing Project Efficiency and Cost-Effectiveness Taking a Case Study of Mobolaji Bank Anthony Towers At Plot 5, Okotie Eboh Street S.W. Ikoyi, Lagos State. International Research Journal of Innovations in Engineering and Technology, 07(08), 179–183. https://doi.org/10.47001/IRJIET/2023.708023.
- Uğural, M. N. (2023). Material Selection with Value Engineering Technique-A Case Study in Construction Industry. Tehnicki Vjesnik, 30(1), 292–301. doi:10.17559/TV-20220201102150.
- Abdelrahman, S. A., & Nassar, A. H. (2024). Integrating theory and practice in value engineering within Egypt’s construction industry. Journal of Engineering and Applied Science, 71(1), 79–94. doi:10.1186/s44147-024-00526-3.
- Aldrees, R. M., Al-Gahtani, K. S., Alsugair, A. M., Aljadhai, S. I., & Alsanabani, N. (2025). Integrated value engineering and multi-criteria decision-making process in BIM framework for pipe materials selection. KSCE Journal of Civil Engineering, 29(4), 100065. doi:10.1016/j.kscej.2024.100065.
- Adeyinka, M. A., Okogwu, C., Agho, M.O., Ikwue, U., Ayodeji, S.A., & Daraojimba, C. (2024). Value Engineering and Value Analysis: Unexplored Potentials in Procurement and Supply Chain Management. Advances in Industrial Engineering and Management, 12(1), 13–22. doi:7508/aiem.01.2024.13.22
- Chaudhari, K. (2024). Unveiling the power of value engineering: Enhancing efficiency and maximizing value. International Journal of Engineering Research & Technology (IJERT), 13(8), 387-388.doi:10.17577/IJERTV13IS080004
- Osman, N., & Steels, L. (Eds.). (2025). Value Engineering in Artificial Intelligence: Second International Workshop, VALE 2024, Santiago de Compostela, Spain, October 19–24, 2024, Revised Selected Papers. Lecture Notes in Computer Science , Springer, Cham, Switzerland. doi:10.1007/978-3-031-85463-7.
- Qin, J., Martínez, L., Pedrycz, W., Ma, X., & Liang, Y. (2023). An overview of granular computing in decision-making: Extensions, applications, and challenges. Information Fusion, 98, 101833. doi:10.1016/j.inffus.2023.101833.
- Chatterjee, K., & Kar, S. (2017). Unified Granular-number-based AHP-VIKOR multi-criteria decision framework. Granular Computing, 2(3), 199–221. doi:10.1007/s41066-017-0039-4.
- Samal, S., & Dash, R. (2023). Developing a novel stock index trend predictor model by integrating multiple criteria decision-making with an optimized online sequential extreme learning machine. Granular Computing, 8(3), 411–440. doi:10.1007/s41066-022-00338-x.
- Podvezko, V. (2009). Application of AHP technique. Journal of Business Economics and Management, 10(2), 181–189. doi:10.3846/1611-1699.2009.10.181-189.
- Amiri, M. (2012). To Determine Technology Management Position in Sepah Bank using Analytic Network Process and VIKOR. Journal of Industrial Management Perspective, 1(4), 9–27.
- Anojkumar, L., Ilangkumaran, M., & Sasirekha, V. (2014). Comparative analysis of MCDM methods for pipe material selection in sugar industry. Expert Systems with Applications, 41(6), 2964–2980. doi:10.1016/j.eswa.2013.10.028.
- Tzimopoulos, C., Zormpa, D., & Evangelides, C. (2013). Multiple criteria decision making using VIKOR method. Application in irrigation networks in the Thessaloniki Plain. Proceedings of the 13th international conference on environmental science and technology, CEST, 5-7 September, 2013, Athens, Greece.
- Luthra, S., Govindan, K., Kannan, D., Mangla, S. K., & Garg, C. P. (2017). An integrated framework for sustainable supplier selection and evaluation in supply chains. Journal of Cleaner Production, 140(3), 1686–1698. doi:10.1016/j.jclepro.2016.09.078
|