- Feng, S., Xiao, H., Li, Y. Influence of interfacial parameters and testing methods on UHPC–NSC bond strength: Slant shear vs. direct tensile testing. Cement and Concrete Composites, 2022; 131: 104568. doi:10.1016/j.cemconcomp.2022.104568.
- Ibrahim, T. E., Abdulrazzaq, O. A., Saleh, S. M. Slant Shear Bonding Between Old and New Concrete. In: Current Trends in Civil Engineering and Engineering Sciences 2024, Vol 2; 2024 Apr 17–18; Singapore (SG). p. 382–396. doi:10.1007/978-981-97-9368-6_28.
- Abdulrahman, P. I., Bzeni, D. K., Ahmed, S. M. Pull-off and slant-shear tests for evaluating bond strength in polymer-modified cement mortar reinforced with polypropylene fibers. Journal of Building Engineering, 2025; 104: 112259. doi:10.1016/j.jobe.2025.112259.
- Aaron Nzambi, V. S., Dênio, O. Optimized Slant Shear Interface between Steel-Fiber Concretes. ACI Structural Journal, 123: doi:10.14359/51749306.
- Wong, L. S. Durability Performance of Geopolymer Concrete: A Review. Polymers, 2022; 14: 868. doi:10.3390/polym14050868.
- Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., Zeyad, A. M. Potential applications of geopolymer concrete in construction: A review. Case Studies in Construction Materials, 2021; 15: e00733. doi:10.1016/j.cscm.2021.e00733.
- Chowdhury, S., Mohapatra, S., Gaur, A., Dwivedi, G., Soni, A. Study of various properties of geopolymer concrete – A review. Materials Today: Proceedings, 2021; 46: 5687–5695. doi:10.1016/j.matpr.2020.09.835.
- Parathi, S., Nagarajan, P., Pallikkara, S. A. Ecofriendly geopolymer concrete: a comprehensive review. Clean Technologies and Environmental Policy, 2021; 23: 1701–1713. doi:10.1007/s10098-021-02085-0.
- Farouk Ghazy, M., Taman, M. H., ELatfawy, S. S. Properties and Durability of Geopolymer Based Materials and It's Utilizing as a Repair and Strengthening Materials: A Review. International Research Journal of Engineering and Technology (IRJET), 2022; 9: 1272–1290.
- Sharkawi, A., Taman, M., Afefy, H. M., Hegazy, Y. Efficiency of geopolymer vs. high-strength grout as repairing material for reinforced cementitious elements. Structures, 2020; 27: 330–342. doi:10.1016/j.istruc.2020.06.001.
- Tu, G., Liu, Q., Zhang, Y., Liu, C. Bond Strength and Interfacial Transition Zone between Aggregate and Cement Paste: Effect of Aggregate Type. Journal of Materials in Civil Engineering, 2027; 39: 04026498. doi:10.1061/JMCEE7.MTENG-23535.
- Phiangphimai, C., Lathulee, C., Hanjitsuwan, S., Chompoovong, K., Phoo-ngernkham, T., Singsang, W., Chindaprasirt, P. Shear bond strength of patch repair using hybrid alkali-activated binders exposed to H2SO4 and MgSO4 solutions. Construction and Building Materials, 2025; 497: 143941. doi:10.1016/j.conbuildmat.2025.143941.
- Peng, G., Niu, D., Hu, X., Pan, B., Zhong, S. Experimental study of the interfacial bond strength between cementitious grout and normal concrete substrate. Construction and Building Materials, 2021; 273: 122057. doi:10.1016/j.conbuildmat.2020.122057.
- Morthala, R. R., Prakash, S. S. Effect of surface preparation and shear links on the interface bond behaviour between ultra-high-performance and normal strength concrete. Engineering Structures, 2026; 350: 121965. doi:10.1016/j.engstruct.2025.121965.
- Qasim, M., Lee, C. K., Zhang, Y. X. An experimental study on interfacial bond strength between hybrid engineered cementitious composite and concrete. Construction and Building Materials, 2022; 356: 129299. doi:10.1016/j.conbuildmat.2022.129299.
- Prak, L., Sooksomklin, N., Tanapornraweekit, G., Sumranwanich, T., Tangtermsirikul, S. Influence of interface joint types on shear bond strength between ultra-high performance concrete and normal concrete. Journal of Adhesion Science and Technology, 2026; 40: 3435–3450. doi:10.1080/01694243.2026.2639959.
- Abdulrahman, P. I., Bzeni, D. K. Bond strength evaluation of polymer modified cement mortar incorporated with polypropylene fibers. Case Studies in Construction Materials, 2022; 17: e01387. doi:10.1016/j.cscm.2022.e01387.
- Jangate, W., Sujivorakul, C. The effect of surface roughness and a steel anchor on the direct-shear bond between existing concrete and new concrete. Structures, 2024; 70: 107799. doi:10.1016/j.istruc.2024.107799.
- Sravanthi, M., Poongodi, K., Awoyera, P. O., Fadugba, O. G., Romero, L. M. B. Development of high-early-strength engineered cementitious composite with GGBS and nano-silica for bonding with self-compacting concrete. Scientific Reports, 2026; 16: 34252. doi:10.1038/s41598-026-63595-9.
- Li, L., Gui, Y., Luo, T. Bond between alkali-activated repair mortars and OPC concrete substrate: Strength calculation, failure mode statistics and mechanisms. Construction and Building Materials, 2026; 543: 148189. doi:10.1016/j.conbuildmat.2026.148189.
- Huang, D., Albareda, A., Pons, O. Experimental study of bond behavior on sprayed and poured mortar–brick interface with latex bonding agent under conventional and humid environments. Journal of Building Engineering, 2023; 77: 107459. doi:10.1016/j.jobe.2023.107459.
- American Society for Civil Engineers. ASTM C882/C882M-23: Standard Test Method for Bond Strength of Bonding Systems Used With Concrete By Slant Shear. Reston (VA): ASTM; 2023. doi:10.1520/C0882_C0882M-23.
- Ariyadasa, P. W., Manalo, A. C., Lokuge, W., Aravinthan, V., Pasupathy, K., Gerdes, A. Bond performance of fly ash-based geopolymer mortar in simulated concrete sewer substrate. Construction and Building Materials, 2024; 446: 137927. doi:10.1016/j.conbuildmat.2024.137927.
- Ahmad Zailani, W. W., Bouaissi, A., Abdullah, M. M., Abd Razak, R., Yoriya, S., Mohd Salleh, M. A., Rozainy M. A. Z, M. R., Fansuri, H. Bonding Strength Characteristics of FA-Based Geopolymer Paste as a Repair Material When Applied on OPC Substrate. Applied Sciences, 2020; 10: 3321. doi:10.3390/app10093321.
- Yang, J., Xia, J., Cheng, C., Wang, J., Zhang, J., Wang, G. Research on the Bonding Performance of UHPC–NC Interfaces With Different Sizes of Grooves. Frontiers in Materials, 2022; Volume 9 - 2022: doi:10.3389/fmats.2022.859717.
- Abo El-Khier, M., Morcous, G. Friction and Cohesion Interface Shear Factors of Ultra-High-Performance Concrete (UHPC) Cast on Hardened Conventional Concrete. Buildings, 2023; 13: 1253. doi:10.3390/buildings13051253.
- Wang, Y.-S., Peng, K.-D., Alrefaei, Y., Dai, J.-G. The bond between geopolymer repair mortars and OPC concrete substrate: Strength and microscopic interactions. Cement and Concrete Composites, 2021; 119: 103991. doi:10.1016/j.cemconcomp.2021.103991.
- Perčić, I., Goleš, D. Bond Strength of Normal Weight Concrete - to - Lightweight Aggregate Concrete Interface: Influencing Factors, Testing Methods, Research Review and Assessment. Journal of Advanced Concrete Technology, 2026; 24: 624–637. doi:10.3151/jact.24.624.
- Ojha, P. N., Kaura, P., Singh, B., Daniel, Y. N., Kumar, N. Evaluation of Polymer Modified Mortar and Bonding Agent for Structural Repair. Journal of Asian Concrete Federation, 2021; 7: 56 –62. doi:10.18702/acf.2021.12.7.2.56.
- Li, B., Campos Sanchez, A., Wang, H.-C., Yu, Y., Ferche, A. C., Bayrak, O. Experimental Study on Interface Shear Resistance Through Slant Shear Tests. SSRN Electronic Journal, 2024; doi:10.2139/ssrn.4866710.
- Jiang, H., Gao, Y., Mo, F., Fang, S., Fang, Z., Huang, J., Zhang, W., Wei, J. Experimental and analytical study on existing concrete slabs strengthened with ultra-high performance concrete: From interfacial bond to structural flexural performance. Construction and Building Materials, 2026; 543: 148305. doi:10.1016/j.conbuildmat.2026.148305.
|